Landlord Gas Safety Certificates — Selwood (BA11)

Getting quotes for landlord gas safety certificates can feel like a gamble when you don't know the trade. You want someone who turns up when they say they will, explains what they're doing, and leaves you with a system you understand. That's the standard we work to from 24 Bristol Road, Radstock BA3 3EE. We're Gas Safe registered, OFTEC registered and a Worcester Bosch Accredited Installer, so the paperwork and the workmanship both hold up to scrutiny. Mains gas covers much of the area, with off-grid pockets, which changes the appliance shortlist.

BA11 · Somerset · 8 mi from Radstock · A361
Flue and pipework detail from a landlord gas safety certificates job in Somerset — moderately hard water water area

Why Selwood households use us

Gas Safe registered

Reg. 549918 — every gas job notified to Building Control and a CP12 issued where required.

Worcester Bosch Accredited

Qualifies your install for the full 10-year manufacturer guarantee* on supported models.

Checkatrade 9.9/10

362+ verified reviews from real customers across BA and BS postcodes.

Fixed written prices

No verbal-only quotes. You'll get the boiler model, controls and warranty in writing before we book.

Site realities in and around Selwood

This area has a genuine mix of mains gas and oil-fired properties, sometimes on the same street, depending on when the gas network reached that particular row of houses. It's worth confirming which fuel your property is actually on and whether a fuel switch is realistic before assuming either option is off the table. Being registered for both Gas Safe and OFTEC work means we can look at the honest options for your specific property rather than steering you toward whichever fuel we happen to be set up for. Our van runs the A361 to reach you, 8 miles out from the Radstock workshop. Selwood is roughly 8 miles from our Radstock base via the A361. Typical property stock here: stone cottages and modern estates. A meaningful share of properties around Selwood are off the gas grid, so oil boiler installs and tank swaps make up a fair part of what we do locally. Repair calls in Selwood usually get a same-week visit, with most common faults fixed on the first attempt.

What you get, start to finish

  • Gas Safe registered, CP12 issued same day
  • Tightness test, combustion analysis and flue checks
  • Tenant access arranged by text or phone
  • Several properties aligned to one renewal date
  • Free written quote, no obligation
  • Local aftercare from a 8-mile base

Also covering the lanes around Selwood

Beyond Selwood we're frequently on jobs in Frome (BA11), Nunney (BA11), Berkley (BA11) and Trudoxhill (BA11) — so spares, follow-ups and annual services are straightforward.

Selwood questions we get asked

Do you cover Selwood?
Yes. Selwood is 8 miles from our workshop at 24 Bristol Road, Radstock BA3 3EE, reached via the A361, and it's a regular part of our working area. We're Gas Safe and OFTEC registered, so we cover both mains gas and oil work out here without treating it as a special trip.
What's actually checked during an annual boiler service?
A service includes a visual and functional check of the boiler's casing and controls, flue gas analysis to confirm safe and efficient combustion, checking the flame picture and pressure, inspecting seals and condensate, and testing safety devices. It's a safety check as much as a performance one, and it's what keeps most manufacturer warranties valid.
How do we decide between a combi boiler and a boiler-plus-cylinder system?
It comes down to hot water demand and available space. A combi heats water on demand with no cylinder to fill, which suits smaller households and single-bathroom homes, while a system or regular boiler with a cylinder stores hot water and copes far better where two bathrooms or a bath and shower run at the same time.
What's a CP12 and do I need one as a landlord?
A CP12 (Landlord Gas Safety Record) confirms every gas appliance in a rented property has passed an annual safety check by a Gas Safe registered engineer. It's a legal requirement before letting and at each renewal, a copy has to go to tenants, and it needs to be renewed every 12 months without a gap.
What's the difference between a power flush and a chemical flush?
A chemical flush circulates a cleaning agent through the existing system to loosen light debris, while a power flush uses a pump to force water at higher velocity and reversed direction through radiators and pipework to shift heavier sludge. We usually recommend the more thorough power flush before connecting a new boiler to an older system.
We've got an oil-fired Rayburn or Aga heating the house — can that be replaced with a standard boiler?
Yes, where a range cooker like a Rayburn or Aga is also running the central heating, it can be separated out and replaced with a dedicated modern oil or LPG boiler, keeping the range purely for cooking if you want to retain it, or removing it entirely. Sizing the new boiler correctly for the property is the key part of getting this right.

Booking work in Selwood

Worcester Bosch Accredited Installer status means we've met the manufacturer's own standards for training and installation quality, which is part of why we can offer the extended guarantee on qualifying installs. It's worth asking any installer whether they hold equivalent accreditation, not just whether they can fit the boiler. Send the appliance make, model and any fault code and you get a straight answer, not a sales script. Our van runs the A361 to reach you, 8 miles out from the Radstock workshop.

Local reference data

County
Somerset
Postcode district
BA11
Settlement type
village
Nearest classified road
A361
Distance from our base
8 miles (Radstock, BA3)
Typical building stock
stone cottages and modern estates
Water hardness
moderately hard water
Fuel availability
mains gas with off-grid pockets
Customer mix
homes alongside small commercial and agricultural premises
Nearby areas covered
Frome, Nunney, Berkley, Trudoxhill

Detail that matters in Selwood

Single-pipe circuits in older stone cottages

A lot of the stone cottages and farmhouses around Selwood were plumbed decades ago on a single-pipe gravity circuit, where each radiator draws from and returns to the same loop rather than having its own flow and return. It works, but radiators furthest from the boiler receive water that's already cooled after giving up heat to the ones before it, so the far end of the house is always the coldest. Converting to a two-pipe layout means new pipe runs, which in a stone cottage often means chasing lime plaster or lifting flagstones — not a trivial job. Where a full rewire of the pipework isn't wanted, we sometimes improve balance instead by oversizing the radiators nearest the end of the run and fitting TRVs to hold back the ones nearest the boiler.

Chimney liners for boilers using an existing flue

Where an older boiler used the property's original brick or stone chimney as its flue route, a replacement condensing boiler usually can't use the same masonry flue unlined, because the flue gases are cooler and wetter and will attack unprotected brickwork and mortar over time. A correctly specified stainless steel liner, sized to the boiler manufacturer's flue length and diameter tables, carries the flue gases safely and lets the existing chimney be reused rather than needing a new wall or roof penetration — often the only realistic option on a listed or solid-wall property in Selwood where an external flue run isn't permitted. The liner has to be inspected and swept as part of ongoing servicing exactly as an open-fire flue would be, which is easy to overlook once it's hidden inside the chimney.

What a proper heating quote should include

A quote worth relying on states the specific boiler or equipment model, the labour and materials it covers, whether a system flush and magnetic filter are included, what happens to old equipment removal and disposal, and what's excluded — an unexpected gas pipe upsizing or asbestos-containing material discovered during removal, for example, which can't always be known before work starts. It should also state who's completing the Gas Safe or OFTEC notification and Benchmark commissioning record, since that's the paperwork that protects both the manufacturer's guarantee and the property's compliance history when it's sold. A vague one-line quote makes comparing genuinely different offers difficult, because two prices that look similar can cover very different scopes of actual work.

  • Specific make and model, not just "combi boiler"
  • Flush and magnetic filter stated as included or excluded
  • Old equipment removal and disposal covered
  • Notification and Benchmark record responsibility stated

What voids or protects a Worcester Bosch extended guarantee

Worcester Bosch's longer guarantee periods on qualifying installations are conditional on the boiler being installed and commissioned by an Accredited Installer, on an annual service being carried out (by any Gas Safe registered engineer, not necessarily the original installer) within the required window each year, and on system water quality being maintained to the standard set out in their published guidance — meaning a system flush at installation, correct inhibitor dosing, and in hard water areas a scale reducer or filter as specified. Missing a single annual service, or installing without the required water treatment, can reduce cover back to the manufacturer's standard guarantee period even if the boiler itself has had no faults. Keeping the Benchmark record and service history together is what lets a claim be assessed quickly if it's ever needed.

Selwood's A361 corridor and what it means for scheduling

Properties along or near the A361 corridor around Selwood are generally straightforward to reach without the access constraints of side lanes or unclassified roads further off the main network, which helps with scheduling deliveries of boilers, cylinders or oil tanks to a fixed slot. It doesn't change the technical requirements of the job itself, but predictable access does mean less contingency time needs building into a visit, and it makes coordinating a delivery with an installation date more reliable than on a property with a difficult final approach. We still confirm any specific parking or loading restriction on the immediate street before a job, since a fast main road doesn't guarantee easy stopping right outside the property.

Signs a boiler repair is no longer the right call

A boiler that's failing repeatedly, needing a different part replaced every service, or over roughly ten to fifteen years old is approaching the point where continued repair costs more over time than replacement, particularly once a heat exchanger — the most expensive single part — starts to show signs of failure through leaks or reduced output. Efficiency is the other half of the calculation: an older non-condensing boiler running at 70-80% efficiency against a modern condensing combi at over 90% means a meaningful chunk of every unit of fuel burned in the old boiler is simply lost up the flue. We give a straight answer on repair versus replace based on the fault found and the boiler's age and condition, rather than defaulting to whichever is more profitable to us on the day.

What a landlord gas safety record actually checks

A landlord gas safety record (still commonly called a CP12) requires an annual check of every gas appliance, flue and installation pipework in a rented property, carried out by a Gas Safe registered engineer and recorded on a certificate issued to the tenant within 28 days and kept by the landlord for at least two years. The check covers appliance operating pressure, safety device function, ventilation adequacy, flue performance and visual condition, and any appliance found "at risk" or "immediately dangerous" is classified and, where necessary, disconnected on the spot rather than left for a follow-up visit. Landlords with property across homes alongside small commercial and agricultural premises areas like Selwood have a legal duty to arrange this before a new tenancy starts and annually thereafter, and failure to do so is a criminal offence, not just a lease breach.

  • Required before a tenancy starts and annually thereafter
  • Certificate given to tenant within 28 days of the check
  • Records kept by the landlord for at least 2 years
  • "At risk" or "dangerous" appliances can be disconnected immediately

How a condensing boiler recovers extra heat

A condensing boiler passes flue gases through a secondary heat exchanger before they leave the flue, extracting additional heat by condensing water vapour in the exhaust back into liquid, which is expelled as the mildly acidic condensate water down the drain. This is why every condensing boiler needs a condensate drainage route as part of its installation, unlike older non-condensing boilers, which simply vented hot dry gas straight out. The efficiency benefit only fully materialises when the boiler is actually condensing regularly, which needs a return water temperature low enough — generally below 55°C — for water vapour to condense in the first place. A condensing boiler run permanently at a high flow temperature can spend much of its time not actually condensing, which is one of the main reasons flow temperature settings matter as much as the boiler model chosen.

Coordinating heating and gas safety across multiple let properties

Landlords and agents managing several let properties across Somerset, rather than a single tenancy, benefit from staggering annual gas safety checks and boiler services onto a schedule that's easy to track rather than each property renewing on whatever date the previous engineer happened to visit. Keeping service records and gas safety certificates for each property organised together also matters at the point a tenancy changes, since an incoming tenant is legally entitled to see a current certificate before or at the start of their tenancy, not weeks afterwards. We can align service and safety-check dates across a small portfolio where that's useful, rather than treating each property as a completely separate booking with no coordination between them.

Other boiler services in Selwood

Get Your Free Quote

Tell us about your project — we'll respond the same working day.

Worcester Bosch Accredited · 10 Year Guarantee*

New Worcester boiler with a 10 year guarantee*

Free no-obligation quotes for installation, servicing & repairs across BA & BS postcodes.

Call Now Get Quote