My oil tank is old — does it need replacing alongside the boiler?

Not automatically, but we check the tank's age, material, and condition as part of any oil boiler quote. Steel tanks corrode from the inside and plastic tanks degrade with UV exposure over time; if we find cracking, rust weeping, or a missing bund we'll flag it, because a failed tank is a pollution and insurance risk, not just a heating one.

How much longer does a full conversion take compared to a straight boiler swap?

A straight like-for-like swap in the same location is typically a single working day. Converting boiler type (for example back boiler to combi, or oil to LPG), relocating the boiler, or adding a new cylinder usually needs one to two extra days for additional pipework, flue routing, and electrical work, which we'll scope out at survey.

Who actually carries out the work?

A Gas Safe and, where relevant, OFTEC registered engineer from our own small team carries out the job — we don't sub the install out to a third party after quoting. You deal with the same people from survey through to commissioning and any aftercare calls.

Stone cottages seem to lose heat fast — does that change what boiler we need?

Solid stone walls and older windows do increase heat loss compared to cavity-wall construction, so we size the boiler and radiators around a proper heat loss calculation for the property rather than just matching what's there already. Getting this right matters more in a cottage than a modern house, where an undersized system will never quite keep up.

Does an exposed, higher-up location affect boiler choice at all?

Wind exposure mainly affects flue positioning — a room-sealed balanced flue can be more prone to being affected by strong, gusting wind in an exposed spot, and terminal guards or a slightly different position can help. It doesn't rule out any particular boiler type, but it's something we check at survey on more exposed sites.

Do you cover all of Easton?

Yes — every street in BA5 that falls under Easton, plus the lanes towards Wells and Westbury-sub-Mendip. We're 11 miles away in Radstock, so most jobs are reached in well under half an hour.

Easton Boiler Installation

Some properties make boiler installation straightforward; others need a bit more thought about parking, access to the boiler cupboard, or how equipment gets in and out. We factor that into the visit rather than discovering it on the day. Working from 24 Bristol Road, Radstock BA3 3EE across the Radstock, Bath and Mendip area, we're Gas Safe registered and OFTEC registered, so both mains gas and oil-fired work is covered under one roof. Access is lane access, so parking, spoil removal and delivery timing get planned in advance. Mains gas covers much of the area, with off-grid pockets, which changes the appliance shortlist. In Easton itself (BA5, Somerset) that usually means stone cottages and modern estates, roughly 11 miles from the workshop.

07516 118198 Call now

BA5 · Somerset · 11 mi from Radstock · A371

Controls and cylinder layout typical of Easton homes (BA5), boiler installation in Easton (BA5) — A371 corridor

How Somerset building stock shapes the spec

Stone cottages and farmhouses around here were mostly built long before central heating existed, so pipework and boiler locations have usually been retrofitted at some point, sometimes more than once. Thick stone walls, uneven floor levels and low ceilings can all affect where a boiler or cylinder can practically go, and older stonework doesn't always take fixings the way modern block or brick does. We work around those constraints on site rather than assuming a straightforward install. Access is lane access, so parking, spoil removal and delivery timing get planned in advance. Our van runs the A371 to reach you, 11 miles out from the Radstock workshop. Easton is roughly 11 miles from our Radstock base via the A371. Typical property stock here: stone cottages and modern estates. A meaningful share of properties around Easton are off the gas grid, so oil boiler installs and tank swaps make up a fair part of what we do locally. When we quote boiler installation here we factor in flue routing, condensate fall and gas-supply pipe sizing before the price is fixed.

Registrations and how work is signed off

Worcester Bosch Accredited

Qualifies your install for the full 10-year manufacturer guarantee* on supported models.

OFTEC trained

Oil boilers, oil tanks and pipework — fully certified for off-grid installs and replacements.

Fixed written prices

No verbal-only quotes. You'll get the boiler model, controls and warranty in writing before we book.

Gas Safe registered

Reg. 549918 — every gas job notified to Building Control and a CP12 issued where required.

Also covering the lanes around Easton

Beyond Easton we're frequently on jobs in Wells (BA5), Westbury-sub-Mendip (BA5), Wookey (BA5) and Wookey Hole (BA5) — so spares, follow-ups and annual services are straightforward.

The work, step by step

Combi, system & regular boilers
Like-for-like swaps in a single day
Worcester, Vaillant, Ideal, Grant & more
Up to 10-year manufacturer warranties
Free written quote, no obligation
Local aftercare from a 11-mile base

Straight answers for Easton homeowners

My oil tank is old — does it need replacing alongside the boiler?: Not automatically, but we check the tank's age, material, and condition as part of any oil boiler quote. Steel tanks corrode from the inside and plastic tanks degrade with UV exposure over time; if we find cracking, rust weeping, or a missing bund we'll flag it, because a failed tank is a pollution and insurance risk, not just a heating one.
How much longer does a full conversion take compared to a straight boiler swap?: A straight like-for-like swap in the same location is typically a single working day. Converting boiler type (for example back boiler to combi, or oil to LPG), relocating the boiler, or adding a new cylinder usually needs one to two extra days for additional pipework, flue routing, and electrical work, which we'll scope out at survey.
Who actually carries out the work?: A Gas Safe and, where relevant, OFTEC registered engineer from our own small team carries out the job — we don't sub the install out to a third party after quoting. You deal with the same people from survey through to commissioning and any aftercare calls.
Stone cottages seem to lose heat fast — does that change what boiler we need?: Solid stone walls and older windows do increase heat loss compared to cavity-wall construction, so we size the boiler and radiators around a proper heat loss calculation for the property rather than just matching what's there already. Getting this right matters more in a cottage than a modern house, where an undersized system will never quite keep up.
Does an exposed, higher-up location affect boiler choice at all?: Wind exposure mainly affects flue positioning — a room-sealed balanced flue can be more prone to being affected by strong, gusting wind in an exposed spot, and terminal guards or a slightly different position can help. It doesn't rule out any particular boiler type, but it's something we check at survey on more exposed sites.
Do you cover all of Easton?: Yes — every street in BA5 that falls under Easton, plus the lanes towards Wells and Westbury-sub-Mendip. We're 11 miles away in Radstock, so most jobs are reached in well under half an hour.

Booking work in Easton

Getting in touch about boiler installation is straightforward: call 07516 118198 within our normal working hours, Monday to Friday, 8:30am to 5pm, describe the property and what you need, and we'll talk through whether a survey makes sense as the next step. Photos of the existing setup speed up pricing for village properties like these. Terrain is hill top, which matters for condensate runs and tank siting. Conservation and listed constraints apply to parts of the area, so external work is checked first.

07516 118198 All services in Easton

Area data we work from

County: Somerset
Postcode district: BA5
Settlement type: village
Nearest classified road: A371
Distance from our base: 11 miles (Radstock, BA3)
Typical building stock: stone cottages and modern estates
Water hardness: moderately hard water
Fuel availability: mains gas with off-grid pockets
Customer mix: homes alongside small commercial and agricultural premises
Nearby areas covered: Wells, Westbury-sub-Mendip, Wookey, Wookey Hole

Practical considerations across BA5

Planning a visit out to Easton

At 11 miles from Radstock via the A371, a job in Easton is planned as a full visit rather than a quick call-back, which is why we ask more detail up front — model numbers, symptoms, access notes — so the first visit is more likely to be the one that resolves the issue rather than the one that diagnoses it. For multi-stage work such as a full boiler and system upgrade, we sequence the survey, any preparatory work and the installation to minimise separate trips where the job allows it. It doesn't affect the standard of work or the paperwork completed on-site, but it's a reasonable practical difference from a job five minutes from the workshop, and we're upfront about it when scheduling.

What different boiler noises usually mean

A kettling or rumbling sound from a boiler is most often scale or sludge build-up on the heat exchanger causing localised boiling as water is trapped and overheated in restricted channels — the heating equivalent of a kettle furring up. A banging or knocking sound in pipework, sometimes called water hammer, is usually caused by a valve closing too quickly or trapped air rather than the boiler itself. A whining or humming sound tends to point to the circulating pump, either from wear or from air in the system reducing lubrication at the bearing. Diagnosing correctly from the noise alone isn't reliable enough to act on without checking system pressure, inhibitor condition and the pump directly, but the noise itself is a useful first indicator of which of those to check first.

Building Control notification for boiler work

Installing or replacing a boiler is notifiable work under Building Regulations, and a Gas Safe or OFTEC registered installer working within their scheme's competent-person arrangements notifies the local authority electronically on completion, which avoids the homeowner having to apply for Building Regulations approval separately and pay a council fee for it. This generates a compliance certificate that matters at the point of selling the property — conveyancing solicitors routinely ask for it, and its absence can hold up a sale. Work carried out by someone outside a competent-person scheme has to be notified to Building Control directly and inspected, which is slower and often more expensive. We notify every applicable installation as standard and the certificate follows automatically.

Pumped-oil versus gravity feed: does it matter?

Older oil systems sometimes still rely on gravity feed, where the tank sits higher than the burner and oil flows down to it under its own weight; a pumped system uses the burner's internal pump to draw oil up from a tank at any level, including below the boiler. Gravity feed limits where a tank can be sited and is more prone to airlocks if the line runs dry, while a pumped system is more flexible on tank position but needs the pipe run and lift height kept within the burner pump's rated capacity — usually no more than a few metres of lift and a set maximum run length. When we replace an oil boiler we check which type the existing tank and pipework support before assuming a straight swap, because a tank sited for gravity feed may need repositioning or a different pump to suit a modern burner.

Oil tank de-sludging: why it's not optional

Oil sitting in a tank for years accumulates water from condensation and fine sediment that settles at the bottom, and over time this forms a sludge layer that can be drawn into the fuel line, particularly when the tank is nearly empty and the outlet pulls from lower in the tank than usual. Sludge blocks fine oil filters and burner nozzles, which shows up as burner lockouts or a boiler that won't fire cleanly rather than as an obvious tank problem. De-sludging drains and cleans the tank base without necessarily removing the whole tank, and it's worth doing when a tank is inherited with a property, before switching to a new boiler, or if lockouts recur despite the filter and nozzle being replaced. It's a preventative job that's cheaper done on schedule than after a burner failure it caused.

LPG as an alternative to oil off the gas grid

Properties around Easton that sit off the mains gas network aren't limited to oil — bulk LPG, stored in an above-ground tank on a concrete base with the same OFTEC-style clearance and access rules as oil, runs standard gas-rated boilers with only a change of injector and pressure setting rather than a different boiler entirely. It suits households that want a gas hob and gas-style modulation rather than an oil burner's on/off firing pattern. The tank still needs delivery access for a tanker, which on some rural driveways is the deciding factor over oil. We check the access route for the largest realistic delivery vehicle before recommending LPG over oil, because a tank that can't be filled easily causes more disruption than the fuel choice was meant to solve.

Other boiler services in Easton

Worcester Bosch Accredited · 10 Year Guarantee*

New Worcester boiler with a 10 year guarantee*

Free no-obligation quotes for installation, servicing & repairs across BA & BS postcodes.

07516 118198 Request a Quote